Written by Gwenda on December 14th
2012
Any similarity to any other tutorial
is purely coincidental
You will need:
Font of choice – I used Manga Temple ,
found
Template 120 by Denz Designz
Scrapkit is another Gorgeous PTU
Christmas kit called Christmas at Gramms House by Nicky of Inzpired Creationz.
You can purchase this kit
Tube of choice. I used Sitting
Pretty by Keith Garvey.
You can purchase these beautiful
tubes from Keith’s store
Mask of choice – I used 0Mask046 LT.
I’m not sure where I got this mask,
so I have supplied it. Please let me know if this is yours, and I will either
remove, or supply credits.
Snow – in my Supplies
Two Christmas background scenes, or
the ones I used which are in supplies
This tutorial may look a little
daunting to start with, but if you follow each step and take your time, you
should be just fine J
Open Template 120 by Denz Designz.
Copy, and close original
Resize 115%, all layers checked.
Image - Canvas size 700 x 700.
Delete copyright, heartline 1,
heartline 2, life is sweet 2, life is sweet 1, pink square shadow 1.
Click on background at the bottom.
Fill with white.
Layers – new raster layer.
Selections – select all. Paste Paper 4 into selection.
Deselect.
Apply mask 0Mask046 LT
In layers palette, merge group.
Adjust – Hue and Saturation – Colorize 255 255
Drop opacity to 67
Deselect.
Delete template layer.
Garland 1 (from kit) – Flip. Position above large
circle layer and move up a bit.
Sharpen. Duplicate – flip.
Merge both garland layers together,
and then merge again with the paper 6 circle.
Rename GARLANDS ,
Dropshadow.
Pink Square - Selections – select all.
Selections – float. Selections – defloat. Layers – new raster layer. Paste Paper 9 into selections.
Deselect.
Sharpen Paper.
Delete template layer
Merge together the 2 strips top and 2 strips bottom
layers.
Resize Paper 8 80% then 90%.
Paste resized Paper 8 below the merged 2 strips layer and move around until it is
in place. Sharpen.
Click on strips layer. Selections –
select all. Selections – float. Selections – defloat. Selections – modify –
contract 4. Selections – invert. Click on Paper 8 and hit delete
Rename STRIPS.
Delete template layer.
Click on STRIPS layer again. Selections
– select all. Selections – float. Selections – defloat. Selections – modify –
expand 6. Layers – new raster layer. Paste Paper 3 into selection.
Deselect.
Rename STRIPS FRAME
In layers palette, move STRIPS above
STRIPS FRAME layer.
Click on STRIPS. Selections – select
all. Selections – float. Selections – defloat. Click on STRIPS FRAME and hit
delete.
Deselect.
To STRIPS FRAME, give inner bevel of
choice and Dropshadow.
Pink Circle - Selections – select all.
Selections – float. Selections – defloat. Layers – new raster layer. Paste one
of the Christmas scenes into selection. DO NOT DESELECT. Selections – modify –
expand 4. Layers – new raster layer. Paste Paper 3 into selection.
Deselect. Sharpen both paper layers.
Rename Christmas scene CHRISTMAS 1.
Rename Paper 3 layer CHRISTMAS 1 FRAME.
DO NOT DELETE TEMPLATE LAYER. Click
the little eye to the left of the pink template layer to close it off for now.
In layers palette, move CHRISTMAS 1
FRAME to sit above CHRISTMAS 1.
Click on CHRISTMAS 1. Selections –
select all. Selections – float. Selections – defloat.
Click on CHRISTMAS 1 FRAME and hit
delete.
Deselect.
Sharpen frame and give inner bevel
of choice.
Dropshadow.
Blue Circle - Selections – select all.
Selections – float. Selections – defloat. Layers – new raster layer. Paste the
second Christmas scene into selection. DO NOT DESELECT. Selections – modify –
expand 4. Layers – new raster layer. Paste Paper 3 into selection.
Deselect. Sharpen both paper layers.
Rename Christmas scene CHRISTMAS 2.
Rename Paper 3 layer CHRISTMAS 2 FRAME.
DO NOT DELETE TEMPLATE LAYER. Click
the little eye to the left of the blue template layer to close it off for now.
In layers palette, move CHRISTMAS 2
FRAME to sit above CHRISTMAS 2.
Click on CHRISTMAS 2. Selections –
select all. Selections – float. Selections – defloat.
Click on CHRISTMAS 2 FRAME and hit
delete.
Deselect.
Sharpen frame and give inner bevel
of choice.
Dropshadow.
Branch 1 – Resize 75% and paste above mask
layer bottom left.
Sharpen. Dropshadow.
Beads – Resize 60% then 80%. Position
above STRIPS FRAME layer on left.
Sharpen. Duplicate – mirror.
Dropshadow both.
Candle 2 – Paste above Beads layer and leave
where it lands.
Sharpen. Dropshadow.
Tube – Paste, and slide over to the
right so she is sitting on the strip.
Dropshadow.
Dropshadow.
Bird – Resize 40% then 60%. Sharpen.
Duplicate – mirror and resize 85%.
Dropshadow both.
In layers palette, go back to your
pink and blue template circles. Leave them closed off, but move up so they sit
above CHRISTMAS 2. Blue should be above
pink. Merge blue circle template down to pink circle template.
OK . . . Snow Time
Click on the merged pink/blue template layer.
Selections – select all. Selections
– float. Selections – defloat. Layers – new raster layer (name it SNOW1 before
you click OK)
Go to Snow 484 x 484 and copy frame
1.
Back to your tag, and paste into
selection DO NOT DESELECT!
Layers – new raster layer (rename
SNOW2 before you click OK)
Back to Snow 484 x 484 and copy
frame 2
Back to your tag, and paste into
selection DO NOT DESELECT!
Layers – new raster layer (rename
SNOW3 before you click OK)
Back to Snow 484 x 484 and copy
frame 3
Back to your tag, and paste into
selection DO NOT DESELECT!
Layers – new raster layer (rename
SNOW4 before you click OK)
Keep doing this with all the snow
frames from Snow 484 x 484, pasting each one into selection in a new raster
layer above the other.
Deselect only after pasting the 10th
snow layer into selection.
You should end up with 10 snow
layers.
Now in layers palette, go to each of
the snow layers, and click the little eye to the left to close it. Do this to
all snow layers except SNOW1.
You can now delete the pink/blue
template layer.
If you don’t want to animate, then
only paste one layer of snow into selection.
Add any other embellishments of
choice
Add copyrights
Ready to Animate??
Open Animation Shop.
In PSP make sure all snow layers are
closed off, except SNOW1
Edit – Copy Special – Copy merged.
Go to Animation shop. Edit – paste –
as new animation.
Back to PSP.
Close SNOW1 and open SNOW2.
Edit – Copy Special – Copy merged.
Go to Animation shop. Edit – paste –
after current frame.
Back to PSP.
Close SNOW2 and open SNOW3.
Edit – Copy Special – Copy merged.
Go to Animation shop. Edit – paste –
after current frame.
Repeat this last step, closing off
one snow layer and opening the next until you have 10 frames in Animation shop.
In Animation Shop.
Edit – select all
Animation – animation properties.
Check box opaque and change colour
to white. Click OK.
Edit – select all
Animation – frame properties. Change
display time to 5
Save as a gif file.
I hope this wasn’t too confusing, as
it’s a lovely snow effect if you take the time to do it.
Thanks for trying this tutorial and
I would love to see your results!
No comments:
Post a Comment